The Wiral LITE kit comes with the Quick Reel™ patented rope system that makes it possible to set up the line in just a few minutes. The Quick Reel™ consists of a reel for handling the rope and a tightening strap for connecting and tightening it.
01 UNLOCK QUICK REEL™
Press rope guide to unlock Quick Reel™ and unwind the rope.
02 ATTACH CARABINER
Place the rope around the first attachment point, and attach the carabiner to the rope.
03 UNWIND ROPE
Pull out the rope and let the reel rotate freely to unwind the rope.
04 LOCK QUICK REEL™
Lock the Quick Reel™ when you are close to the second attachment point.
05 FASTEN STRAP
Place the tightening strap around the second attachment point, and
attach the large strap carabiner.
06 ATTACH STRAP
Connect the small strap carabiner to the Quick Reel™ rope guide.
07 TIGHTEN STRAP
Tighten the system by pulling the end of the strap with a maximum force of 40 kg / 390 Nm.
08 MOUNT END STOPS
Mount the physical end stops close to the attachment point on each side to avoid crashing into the attachment point if you are not paying attention to what you're doing. See recommended distance based on your setup and use here.
QUICK REEL COMPONTENT OVERVIEW
